Behringer announces FOUR PLAY Quad Voltage Controlled Amplifiers and Mixer Module for Eurorack
Monday July 12, 2021. 03:17 PM , from Gearslutz
Mix It Up
The FOUR PLAY is a feature rich quad VCA module with CV input attenuators, each with a bi-color LED to indicate CV input activity and polarity. Input boost switches add extra gain for lower level input signals. The curve controls allow you to setup the ideal CV response curve from fully exponential to linear, or any combination of the two. The level controls set the VCA gain and allow manual control of the signal output level, both when used as independent VCA’s or when used as a mixer. The VCA’s are DC coupled so can process both audio signals and CV signals.
Ins and Outs
The FOUR PLAY gives you comprehensive connectivity, 4 CV inputs for control or modulation of the VCA’s which are cascaded allowing all 4 VCA’s to be controlled by a single CV input if required. 4 signal input jacks with excellent headroom and the 4 VCA outputs are cascaded so that if only the 4/MIX output jack is used, the module becomes a 4-input voltage-controlled mixer, other combinations are easily selected according to which output jacks are inserted, such as a dual 2 input mixers for ultimate flexibility.
Installing the FOUR PLAY is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows the FOUR PLAY to be mixed with other synth modules for a truly unique set up.
For more information: https://www.behringer.com/product.html?modelCode=P0EK7
Aug, Sun 1 - 09:57 CEST