MacMusic  |  PcMusic  |  440 Software  |  440 Forums  |  440TV  |  Zicos
ribbon
Search

12 Ribbon Mics for Electric Guitar – Take a Listen

Wednesday May 7, 2025. 08:03 PM , from Sweetwater inSync
12 Ribbon Mics for Electric Guitar – Take a Listen
Most engineers know that ribbon mics and electric guitars
are a match made in heaven. But which ribbon mic is right for you? Which one
will sound the best for your style of music? Do you want one of the new
standards, like the Royer R-121, R-10 or AEA R84, or a vintage classic that’s
still in production, like the Beyerdynamic M 160? Or maybe something more
affordable just to get you started?

I thought it would be great to give you the opportunity to
hear them all side by side; plus, there are a few here that I’ve never heard.
So, I gathered up 12 ribbon mics, some vintage designs and some new designs,
and lined them up for you to hear. Here are the mics I chose.

Royer
R-10
Royer
R-121
Beyerdynamic
M 160
sE Electronics
Xr1 R
Golden Age
Project R1 MKII
sE Electronics
Voodoo VR1
AEA
R84
Avantone
CR-14
AEA
N8
Shure
KSM313/NE
AEA
R44CE
Audio-Technica
AT4081

Let’s Listen

If you’re like me, then you’d rather listen than read, so let’s get to it. I’ll detail our recording setup at the end of the article.

CLEAN




DIRTY




HEAVY




The Technical Details

Guitars

For this listening session, I had Don Carr play the three
samples, each on a different guitar.

Clean: American Strat

Dirty: Les Paul Custom

Heavy: Strandberg 7-string

Amp/Cabinet

We used the Revv Generator 120-watt head driving a Mesa/Boogie 4×12 Rectifier cabinet.

Recording Gear

All the samples were re-amped with a Radial SGI Studio Guitar Interface and recorded into Pro Tools at 24-bit/96kHz. The preamp of choice was the Rupert Neve Designs RMP-D8 using its A/D converters. The polarity of all the mics was confirmed using a test signal from a Galaxy Audio Cricket polarity tester.

Alignment

We selected the mic position after listening to it in various places and distances from the cone. The key to presenting a fair comparison is to make sure all the mics are in an identical location so they are all presented with the same audio signal. That’s why I rely on lasers: to align each of the mics in the same space in all three planes. Since distance is critical for ribbon mics, all the mic diaphragms were aligned for distance from the speaker within 6 samples at 96kHz.

What Did You Learn?

If you’ve not worked with lots of ribbon mics before, then listening to these samples may have been an eye-opening experience. Each mic has its own distinct character while retaining that wonderful ribbon sound. I hope you found the ribbon mic that sounds right for you. Call your Sweetwater Sales Engineer at (800) 222-4700 and pick up your very own ribbon mic today!

Credits

Thanks to Shawn Dealey for engineering this session at
Sweetwater Studio A; Don Carr for playing; Rachel Leonard for assisting.

Additional Resources

Utilizing Ribbon Mics for Live Sound

Ribbon Mics — How They Work and When to Use Them

Ribbon Mics: How Do They Work?

10 Best Ribbon Mics for Recording

The post 12 Ribbon Mics for Electric Guitar – Take a Listen appeared first on InSync.
https://www.sweetwater.com/insync/ribbon-mics-for-electric-guitar-take-a-listen/

Related News

News copyright owned by their original publishers | Copyright © 2004 - 2025 Zicos / 440Network
115 sources
Current Date
May, Sat 10 - 05:54 CEST