FLIGHT MODE

Flight Facilities’ hybrid touring rig combines Ableton Live sounds with tracks cued from a Pioneer CDJ2000 flight deck. Buckle up and stow those tray tables.
Story: Christopher Holder
Main Photo: Jordan Munns
The appeal of live music is, at least in part, about witnessing something unique. It is, by definition, a one-off, never-to-be-repeated performance.
Depending on the type of music, an audience feeds off the energy created by a group of musicians doing something rehearsed but not entirely planned. It can be dangerous and exhilarating, like watching a high-wire act.
Electronic music creates a problem for the performers. Some of it simply can’t be physically performed. Other parts can be performed but the nuances from the studio production are almost impossible to recreate, which could easily disappoint audiences. 
I recall attending a PA (personal appearance) in Melbourne of the legendary Detroit techno pioneers, Underground Resistance. Admittedly this was the early ’90s, but the ‘performance’ entailed Underground Resistance’s designated DJ spinning their tracks while they stood in the corner nodding. Awkward.
Orbital turned electronic music into a performance event, headlining Glastonbury’s main stage for a number of years in the ’90s. The Hartnoll brothers proved that live electronic music needn’t be akin to karaoke.
There have been plenty of bands since that have ‘skinned’ the electronic music ‘cat’ in a number of different ways.
Flight Facilities has a couple of live approaches. The recent Aussie tour used their more ‘portable’ rig.
Unusually, at its heart is a full-blown Pioneer DJ rig.
Flight Facilities — Hugo Gruzman and Jimmy Lyell — love to DJ. So when they built their live rig, it felt right to integrate that passion.
Unlike most live electronic acts, where the audio is piped out of a MacBook Pro loaded with (inevitably) Ableton Live, Flight Facilities’ audio sits on the Pioneer decks as Wav files.
Don’t panic, they do run Ableton Live! But only as a sound source, not for tracks. 
Hugo has an MPC-style pad controller which he uses to cue Ableton Live setups — loading a new song’s worth of soft synths and samples (Chain Selectors in Ableton speak). 
There’s no sync between the tracks residing on the Pioneer decks and the Ableton instrument scenes. They’re entirely independent.
I’ll allow FOH engineer Fraser Walker to take over and talk us through his setup.
DIGITAL THINKING
Fraser Walker: Anto (Anthony Pink, monitors) and I share a Digico SD rack connected via fibre. I prefer this approach to a copper split. This way you get your gains right and you’re done. 
We take all the tracks from the Pioneer CDJs digitally (S/PDIF) and into the rack via a Neutrik impedance converter so it can run as AES. Those tracks are a good 80 percent of the audio content and it’s all digital. Which is great. 
All up, I have 12 input channels running through two groups plus effects returns. It’s all manageable enough to be run from a Digico SD11, but due to availability we’re running an SD5. I’m not complaining, it’s nice to spread out and get comfortable. I’m running a desk snapshot for every song. And doing a fair bit of processing, especially on the guest vocals. [Read about Fraser’s plug-in-heavy vocal chain later.]
HEAVY PROCESSING
Fraser Walker: I’m not getting stems or individual backing tracks from stage — it’s a highly produced and radio-ready stereo mix which the guys perform over and the guest artists play and sing over. It means I need to carve out a space for everything that comes after the DJ tracks, to fit them in and to sound correct. For example, the vocals: you can’t squash everything together at the end because the tracks are already heavily processed. 
The challenge is for the instruments and vocals to match the radio-ready sound of those backing tracks. If you don’t, it sounds amateurish and badly mixed. That guitar, sax or live vocal really has to sit in the pocket.
When I explain it, it all sounds a bit overly-tweaky. I mean, if I was mixing 40 channels of live band, I wouldn’t even come close to doing all this sidechain and mid-side compression, because you wouldn’t need to. You’d control the individual elements of the mix. If you’ve got a guitar in a band then you can do what you need to do to ensure it fits into a small pocket in the mix. But a guitar already mixed in a two-track production is largely beyond your control.

SURVIVING COMPUTERS ON STAGE
If Fraser is the guy to glue the performance together it’s Andy Alexander’s job to glue the elements of the stage together. He’s the go-to guy for Flume as well. Andy’s an expert in optimising a stage setup with a computer at its heart and then doing all he can to ensure there are no catastrophic failures.
Andy Alexander: A lot of it is in keeping the show file super lean. By which I mean, keeping the file size down by refining your use of samples — lose anything that’s unnecessary.
I like to keep the CPU usage ticking along at around 10% to give ourselves plenty of CPU headroom for performing.
Depending on who’s playing and how percussive the playing is, you obviously need to have low latency. As you lower the latency settings you’re geometrically increasing the processing required. It’s a compromise. I’ll work on a happy medium with the player, such that they’re playing with the highest latency they can put up with —  it’s not bothering them but we’re keeping the processing power lower.
Hugo is clever with Ableton. Other than adjusting the buffer and cleaning out old files and samples, his show file was already pretty optimal.
During the show I’m screen sharing from side of stage. If I see something going awry I’ll use a break in the set to physically swap computers. If there’s something weird happening I can control it and I’ll hopefully avert disaster via a screen share.
CABLE DISCIPLINE
Andy: The second most important thing on stage for stability, is cable discipline — having redundant power and signal lines built into your looms so you can troubleshoot and fault find quickly.
Experience helps. Experience allows you to quickly fault find based on your own range of experiences. For example, after a while you’ll become familiar with the sounds a computer makes when it’s going to fail. 
Low voltage plug packs are everywhere but not designed for road use. Which is why we’ll design our own custom junction boxes and power supplies. 
Building your own cables and looms is a real asset. I’ll routinely build looms that combine a particular combination of cables, all individually assessed for length to fit the setup. The cables mean you can set up quickly and help ensure something isn’t accidentally pulled out of the back of a unit. 
SOUND CHOICE
Andy: For a computer on stage it’s all about stability and efficiency. As playback and stage guys we try to avoid the use of third-party VSTs in a live setting. The soft synths that come with Live are low in CPU usage and they’re stable. We use built-in Ableton instruments like Analog or Tension.
The vocoder is from within the Ableton Live Analog synth. Hugo doesn’t use the MicroKorg’s vocoder live, but will use it to trigger Analog as the carrier synth. Otherwise he’ll use the MicroKorg as a controller synth of bass sounds. He’ll use the other controller keyboard for another sound in another octave range.
FINESSE & 1 PERCENTERS
To understand the job of Flight Facilities’ sound guys, you need to be thinking in terms of finesse, preparation and attention to detail, not big fader flourishes.
Fraser Walker describes production rehearsals as a great opportunity to get way beyond the meat ’n’ spuds of balancing levels and to dive into the one percenters. If there is one device that best sums up Fraser’s fairy dust approach to applying the extra-extra layer of piano gloss lacquer to the Flight Facilities mix, it’s his hardware Kush Audio Clariphonic Parallel Equalizer. 
Fraser: The Clariphonic EQ is my secret sauce for electronic-style music. I run it over the master bus. The front panel doesn’t have frequencies marked on it — the guy who makes them doesn’t like getting hung up on frequencies, he’d rather you use your ears. But there’s detail in the manual. My ‘Focus’ control is set at about 1.4kHz. That’s addressing that ‘top of the snare’ openness. The ‘Clarity’ knob is set to around 32kHz. It’s a little like the silky ‘air’ band you’ll find on a Neve device or the Maag EQ4. I go analogue from the console (via an instance of Waves’ PuigChild compressor, which is just ticking over and an instance of Waves’ L1 limiter) into the Clariphonic, then analogue into the Lake processor and then AES out of the Lake or analogue depending on the venue. Sometimes I’ll tweak the Clariphonic mid-show when we have a full house and high humidity, just to restore some of that ‘air’ in the mix the bodies are soaking up.
The Clariphonic is a luxury I’d not necessarily have in a live band situation. (Saying that, on a different show, I might put it on vocals and turn that 58 into a Neumann condenser with the Air band.)
For a gig like Flight Facilities I’m not spending my time putting out fires. My job is more about getting the most out of the PA and the venue on the day, or if we’ve got noise limits then it’s about massaging the system output to retain energy in the room without being shut down.

MONITORS: A HEAD OF THE GAME
Anto: In the US we toured with ‘Texas headphones’ — huge side fills. On this tour we’ve decided to go for the d&b E8s on stands which has really helped with getting the most out of the vocalists. Some of the vocals are quieter, and Hugo will want them in his wedge and sometimes it’ll be a struggle for FOH to get the volume up in different venues. So having the E8 speakers right next to Hugo’s head is a good thing for keeping the volume down on stage. We have a sub on stage as well, which is especially good for Jimmy when he’s playing an MS20 or System-1 bass line — he can feel it as well as hear it in his ears.

Fraser Walker: We came from production rehearsals straight into three shows in the Enmore Theatre in Sydney. I knew the FOH position was going to be tucked up under the balcony, which is less than ideal. So I brought the baby Genelecs on board as my meterbridge monitors. I time aligned the Genelecs to the main PA. It meant I could turn them on during the show and they’d give me back some of the highs I was missing under the balcony.  They’re a nice sounding monitor. I actually matched the phase response to the mains as well. I’ve been using Waves InPhase as an all-pass filter and lining up the two sources, making the Genelecs a pure extension of the PA.

Andy: This is a custom-made USB loom with strain relief. It has power for the MicroKorg, power and signal for the MPC, and power and signal for the button box that launches the Ableton instrument scenes. It has a loop where you can hang it and everything is just the right length. It goes back to the computer where you have everything at just the right cable length for swapping it out. 

Andy: Each Ableton Live song loads up a different kit —  drums samples, rhythmic samples and effects.
Fraser: I have a Transient Designer over the SPD drum trigger source. I’m just trying to get into the front end of it and give it some character to stand out. I’ll then put it through Vitamin, which is a multi-band widener. It helps push the high end out to the sides away from everything else is.

Andy: I can thank Fraser for programming the patches. The Pod does some nice amp modelling and mic modelling. It’s been reliable and easy to get around. We’ve been able to dial up some nice disco tones.
Fraser: The Line6 Pod is doing most of the processing work that you hear in the PA. I’ll do some added compression because you need to maintain some life in what Jimmy’s hearing — I don’t want to kill the vibe for him — but I’ll compress it more heavily in the PA. 

Andy: The Roland System-1 is like a modern-day take on the SH101. It has a really nice sub bass sound.
Fraser: I put the System-1 through an instance of Waves R-Bass, which gives it a harmonic kick. There’s one song where I’ll ride the Intensity of R-Bass, firing up the subs as much as they’ll take.

Andy: It’s a white, limited edition Korg MS20 Mini. We retired the old black one. The MS20 is for Jimmy to wang on — crunchy bass notes, massive filter sweeps, bleeps and bloops, all through a delay pedal for dubbing out on. 
Fraser: Because Jimmy is doing huge filter sweeps from 20Hz to 18kHz I’m trying to keep a lid on it when it gets wild. I have a C6 multiband compressor on there and it’ll dig in harder as it rises. When you hit 18kHz you don’t want very much in the PA. At the other end, when the MS20 is in the sub range using the make up gain of the low band to give it a kick.

CUE TIP: SWITCH BETWEEN DJ’ING & PERFORMING
Andy: Hugo and Jimmy love to DJ. The CDJ decks are a natural extension of who they are, so it makes sense for them to be part of their live stage setup. They’re very stable. We take an S/PDIF digital output from the decks straight into the stage box (via a Neutrik impedance box that allows it to run as AES3). The output sound quality is good and works for us.
Having the stems on the CDJ decks also means Hugo and Jimmy can mix from one song to the next, as well as loop sections if they so desire — bearing in mind there’s no sequence or timecode content from Ableton Live that it needs to sync with.
Fraser: Prior to taking on FOH duties I was mixing monitors for Flight Facilities, and had to deal with a curly problem.
Hugo is using booth monitors and headphones, for when he’s cueing tracks. Jimmy, on the other hand, is on in-ear monitors the whole time. But Jimmy deejays as well — using the Pioneer CDJ decks to mix between backing tracks. When he’s doing that, he wants to cue those tracks in his ears and not hear his regular mix. For example, when he’s cueing, he doesn’t want to hear the vocalist, Hugo’s samples, or anything but what he’s cueing. 
In rehearsal he wanted me to learn his routine and to flip his entire monitor mix when he went from playing to cueing. It became clear really quickly that it was an unworkable approach. It meant he had no flexibility with his transitions. We thought about putting him on two packs or unplugging from his pack into a mixer… but none of it was a good solution because sometimes he’s got a guitar around his neck. Then I remembered the Digico has a GPI/O input to use as a trigger. So I connected a footswitch to the board via its quarter-inch GPI/O. We went to Billy Hydes and programmed a little macro that allows Jimmy to switch between two aux mixes on the console — live ears mix, and a cue mix. It’s an elegant solution.

VOCAL PROCESSING SIGNAL CHAIN
Fraser Walker: I rely on a Waves Soundgrid pack for my processing.
I have an instance of the F6 dynamic EQ across the CDJ stereo playback channel. The F6 is side-chained to the vocal group and it’s also set to ‘mid-side’. I’ve got the sidechain frequency band in the mid, and I’m leaving the sides unaffected. The result is I’m carving out a middle pocket while leaving the HF on the sides alone. It’s the only way I can make this show work. It sounds natural yet at times I’m pulling almost 9dB out of the HF in that pocket. It doesn’t sound like it because you’ve still got that frequency content left untouched in the sides — psycho-acoustically it doesn’t sound carved but you’ve created this pocket for the vocals right there in the centre.
The F6 is amazing. You’ve got six frequency bands, you can select each band to be stereo, mid or sides, and if the source is internal or an external sidechain. It’s hugely flexible. 
That’s the first piece in making space for the vocal and then the second part is the compression in the vocal chain.
On all the vocals I have the Primary Source Expander (PSE), which gives me the extra gain I need. Especially when I’m in a venue with wide-spaced infills rather than front fills. I’m trying to hit the centre of the crowd barrier but at the same time I’ll have a quiet vocalist who will occasionally be in that hot zone — so I’ve got to be careful about feedback.
In some venues I’ve got to ring out the mics pretty hard and then I’ll turn on the PSE on the open vocals and push the fader another 15dB. It still sounds very natural and you don’t hear it cutting in on phrases.
Then I have another F6 on the vocal. You can see the settings for one of our vocalists, Brooke. I’ve set a few bands that’ll dynamically grab some notes depending on where she goes in her range. For Brooke it’s compressing some higher, more nasal notes. I can set the threshold and then when the compressor starts to dig a little bit, it smoothes the overall sound. 
It’s then hitting the CLA-2A relatively hard; again that’s just trying to match the compression of what’s actually on the tracks. 
Then it goes through vocal group EQ. That’s where I ring out the vocal mics if I need to. You can see some notches that are room specific.
Finally, it’s some levelling and more compression in MaxxVolume, which is pretty clamped.