Open-Source Tool Designed To Throttle PC and Server Performance Based On Electricity Pricing

Robotics and machine learning engineer Naveen Kul developed WattWise, a lightweight open-source CLI tool that monitors power usage via smart plugs and throttles system performance based on electricity pricing and peak hours. Tom's Hardware reports: The simple program, called WattWise, came about when Naveen built a dual-socket EPYC workstation with plans to add four GPUs. It's a power-intensive setup, so he wanted a way to monitor its power consumption using a Kasa smart plug. The enthusiast has released the monitoring portion of the project to the public now, but the portion that manages clocks and power will be released later. Unfortunately, the Kasa Smart app and the Home Assistant dashboard was inconvenient and couldn't do everything he desired. He already had a terminal window running monitoring tools like htop, nvtop, and nload, and decided to take matters into his own hands rather than dealing with yet another app.

Naveen built a terminal-based UI that shows power consumption data through Home Assistant and the TP-Link integration. The app monitors real-time power use, showing wattage and current, as well as providing historical consumption charts. More importantly, it is designed to automatically throttle CPU and GPU performance. Naveen's power provider uses Time-of-Use (ToU) pricing, so using a lot of power during peak hours can cost significantly more. The workstation can draw as much as 1400 watts at full load, but by reducing the CPU frequency from 3.7 GHz to 1.5 GHz, he's able to reduce consumption by about 225 watts. (No mention is made of GPU throttling, which could potentially allow for even higher power savings with a quad-GPU setup.)

Results will vary based on the hardware being used, naturally, and servers can pull far more power than a typical desktop -- even one designed and used for gaming. WattWise optimizes the system's clock speed based on the current system load, power consumption as reported by the smart plug, and the time -- with the latter factoring in peak pricing. From there, it uses a Proportional-Integral (PI) controller to manage the power and adapts system parameters based on the three variables. A blog post with more information is available here.

WattWise is also available on GitHub.

Read more of this story at Slashdot.