delay 500-series bereich03-Audio
Tuesday January 9, 2018. 03:02 PM , from Gearslutz
I want to show you my new 500 module the „delay“. It is an analog delay based on three MN3005 BBD chips.
The circuit includes a compander to reduce the noisefloor, a 24dB Anti-Alising filter and a 24dB Anti-Clock filter.
Additionally to the delay circuit, there is a adjustable LowCut and a HighCut filter to shape the sound of the delay signal. The LowCut goes from 24Hz up to 2,7kHz and the HighCut goes from 5,0kHz down to 75Hz.
Cause of the switchable Dry signal, the module works perfect as an insert, as on an Aux-bus (analog desk or DAW).
Input and Output level are adjustable in 6dB steps on the PCB.
The Clip-switch adds a soft clipper to the delay path. This creates harmonics to the signal, so it’s getting even more dirty.
The On switch in Off (up) cuts only the input of the delay path. This means, if there is a endless feedback going on and you switch the delay to Off, there will no more signal go to the delay path, but your feedback is still going on. It is also possible to send only single hits to the delay by switching on and off.
Price: 450,-euro (without german tax)
I’m just working on a short video.
Apr, Thu 19 - 17:28 CEST